Atlantic well drillers get together

Ground Water Canada
September 29, 2018
By Ground Water Canada
Truro, N.S. – Drillers, manufacturers and suppliers from five provinces met at the Atlantic Water Well Association in Truro, N.S., to hear expert speakers, see what manufacturers and suppliers had to offer, compare notes with old friends, and enjoy some delicious seafood chowder and grog.

The first association convention in several years took place from Sept. 27 to 29 in the friendly town of Truro, known as “the hub” due to its location at an intersection of railroads.

The get-together was organized by a hardworking committee headed by Tom Burke and Wayne MacRae, and consisting of Danny Constantine, Bill Kyte, Roger Roy, Jon O’Brien, Ron White and Jordan Rogers.

Many attendees connected with old friends at the meet-and-greet on Thursday evening, to tuneful fiddle music that included favourites from Men of the Deeps to Elvis Presley.

Drillers attending from Newfoundland, Prince Edward Island, New Brunswick, Nova Scotia and Ontario had a chance to swap stories that evening – some of them true!

Faye Beaton organized a Friday morning session for the ladies featuring motivational speaker and yoga therapist Knickolle Pitcher, who offered inspiration and tips on how to “live your best life.” In the afternoon, the group enjoyed an afternoon out that included lunch in the vintage Dining Car and Train Station Inn in Tatamagouche, and a tour of Jost Winery in Malagash.

HAMMMERS AND BITS AND GROUTS, OH MY!
While the ladies were sampling wine, some 50 drillers and employees went back to school for the day to learn about diverse topics relating to drilling.

Gaston Brazeau of Franklin Electric went through troubleshooting techniques for different types of pump motors, starting with a primer on the basics of electrical systems and getting into more complex issues encountered on the job. Brazeau explored the causes of low and high amperage, and noted that tools such as meggers and amp meters can be very useful.

Neal Kuszewski of Numa showed everyone how to take care of their down-the-hole hammers and bits to stretch their working life. One takeaway was that carbides of different configurations, numbers and a hardnesses are available for the asking to suit different drilling conditions.

Tony Oosterveld of Viqua explored the risk involved in water disinfection applications. All disinfection applications – filtration, air injection, ion exchange, ultraviolet and activated carbon among them – have an element of risk of contamination, Oosterveld said, and it’s important to assess that risk before deciding which techniques to use and using them to full advantage. Oosterveld, who specializes in ultraviolet treatment systems and has done research and regulatory work in water quality, said he has come to view water treatment holistically, balancing continuous disinfection with ground source protection.

Mark Duckworth of Baroid IDP, a subsidiary company of Halliburton, gave an overview of mud drilling in unstable conditions. The single largest source of contaminants is the solids produced by the drilling process itself, Duckworth said. He went through common drilling issues such as borehole instability and casings/screens not going to the bottom of the well. He also discussed the importance of using some form of drilling fluid and looked at additives that drillers can mix with bentonite to make jobs easier and more successful. He urged “volume over velocity” when drilling to avoid turbulence as much as possible and said some drillers have had success using a product called Fuse-It that is designed to stabilize the hole.

Yannick Belanger of North East Equipment went over compressor basics and care and looked at different types of compressor oil. Belanger stressed the importance of finding your optimal interstage pressure. He said it’s possible your oil may not need changing as often as you think and suggested having it tested (which can be done for approximately $30-40 through a manufacturer) before assuming it needs replacement. However, after 500 hours, drillers should consider changing the oil.

TRADE SHOW TIME
Truro’s mayor, Bill Mills, attended the opening of the trade show and chowder supper. Mayor Mills remarked on having worked with some of the exhibiting suppliers on projects over the years and noted that, with the need for disaster preparedness, there was potential to work together in future.

Nova Scotia Ground Water Association president Jordan Rogers said that although provincial associations meet individually, the AWWA convention provides a much-needed chance for drillers and pump installers to talk to their suppliers face to face and hear about new products and equipment.

Among the drilling represented were Martin Hammond from Newfoundland, Constable Drilling from Ontario, Hawkes Drilling of New Brunswick, Moore Drilling and Thompson Drilling from P.E.I., and DJ’s Well Drilling from Nova Scotia. Many reminisced over a lively photo display of conventions and Canwells past.

The relaxed evening also gave longtime drillers such as Ken Constable and Darrell Jefferson of DJ’s a chance to get acquainted, and friends such as Bill Kyte and Ron White a chance to catch up.

On Saturday morning, as the trade show wrapped up, drillers took in two informative talks.

Don Baron of Aqseptence (formerly Johnson Screens) offered up some “chemical tricks for young pups.” Baron said it’s important to distinguish between cleaning and disinfecting as different products and techniques do different jobs. He showed attendees how to figure PPM from percentages and looked at common disinfectants such as hydrogen peroxide, liquid bleach and powdered bleaches including those containing products such as Nu-well 100 or 110, which some drillers are finding useful.

Mario Brunet of CETCO looked at advancements in geothermal technology and the role grout can play in improving efficiency of ground source heat pumps and reducing the number of boreholes needed on a job. The increase in fracking has made silica less plentiful, Brunet said, and graphite is becoming an increasingly popular option for larger contractors. Among other benefits, it is lighter and less abrasive than silica and will stay in place in the column as it does not drop out of suspension.

Visit our Facebook photo gallery for photo highlights and look for more coverage of the convention in the next issue of Ground Water Canada.

Add comment


Security code
Refresh

Subscription Centre

 
New Subscription
 
Already a Subscriber
 
Customer Service
 
View Digital Magazine Renew

We are using cookies to give you the best experience on our website. By continuing to use the site, you agree to the use of cookies. To find out more, read our Privacy Policy.