Flomatic Corporation has brought out new Model 54-4MJ Flo-E-Centric plug valves with mechanical joint connections.
The Flo-E-Centric plug valves are round-port eccentric plug valves designed in compliance with ANSI/AWWA C517-09.
The Flomatic eccentric plug valve Model 54-4MJ is available from six through 24 inches with a standard gearbox that has a two-inch operating nut for buried service. The valve body, bonnet and plug (NBR encapsulated) are constructed of ASTM A536 grade 65-45-12 ductile iron. The 54-4MJ is available from six through 12 inches with a spherical full-ported seat/plug design and 14 through 24 with a rectangular full-ported seat/plug.
The valve body and top-work are epoxy coated inside and out. The mechanical joint valve-end connection meets the requirements of ANSI/AWWA C111/A21.11 (rubber-gasket joints for ductile-iron pressure pipe and ductile-iron and grey-iron fittings, valves, hydrants, and other appurtenances for potable water, wastewater and reclaimed water supply service).
All fasteners and washers are stainless steel, suitable for water or wastewater service. These valves are also available with flanged-end connections Model 5400.
www.flomatic.com or 1-800-833-2040
Print this page